BHDCQ - TT-S-176E, CL 1
- MSDS: BHDCQ
- Manufacturer: TRIAD PAINT AND CHEMICAL CORP
- Product Name: TT-S-176E, CL 1
- National Stock Number: 8010-00-243-0961
Product Identification
Product ID:TT-S-176E, CL 1
MSDS Date:01/01/1987
FSC:8010
NIIN:00-243-0961
MSDS Number: BHDCQ
Responsible Party
BROOKLYN, NY 11207
US
Emergency Phone: (718) 443-2778
Info Phone: (718) 443-2778
Cage: 33151
Contractor
Telephone: 201-437-6501
Cage: 33151
Ingredients
MINERAL SPIRITS
CAS: 64741-41-9
Fraction By Weight: 58.1%
ACGIH TLV: 100 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:VAPORS MIGHT BE IRRITATING TO EYES, NOSE, AND
THROAT. EXCESSIVE EXPOSURE MAY RESULT IN HEADACHE, DIZZINESS,
AND NAUSEA. SKIN: DEFATTING
First Aid
First Aid:INHALATION: PROVIDE FRESH AIR AND TEST.
SKIN: WASH AFFECTED AREA WITH SOAP AND WATER.
INGESTION: DO NOT INDUCE VOMITING.
DRINK 1-2 GLASS OF WATER TO DILUTE. SEE APHYSICIAN.
EYE: FLUSH
WITH RUNNING WATER FOR 15 MINUTES.
Fire Fighting
Flash Point Method:PMCC
Flash Point:105F/41C
Lower Limits:6.0
Upper Limits:1.0
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:DO NOT USE WATER. FIREFIGHTERS SHOULD WEAR
SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT, ELEC. EQUIP., SPARKS,
AND OPEN FLAMES. VAPORS FORM EXPLOSIVE MIXTURE BETWEEN UPPER AND
LOWER EXPLOSIVE UNITS.
Accidental Release
Spill Release Procedures:VENTILATE AREA. REMOVE ALL SOURCES OF
IGNITION. PICK UP SILL IMMEDIATELY W/INERT ABSORBENT AND
NONSPARKING TOOLS.SAFELY DISPOSE OF SATURATED ABSORBENT BY
IMMERSING IN WATER. WEAR PROTECTIVE CLOTHING DURING CLEAN UP.
Handling
Handling and Storage Precautions:AVOID OPEN FLAME AND SPARK SOURCES.
PROVIDE ADEQUATE VENTILATION. AVOID EXCESSIVE HEAT.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGE/REPEATED
BREATHING OF VAPORS OR SKIN CONTACT.
Exposure Controls
Respiratory Protection:ORGANIC CANISTER MASK, OR AIR PACK IF
VENTILATION IS INADEQUATE.
Ventilation:LOCAL EXHAUST IS RECOMMENDED
Protective Gloves:NEOPRENE RUBBER GLOVES
Eye Protection:CHEMICAL SAFETY GOGGLES
Supplemental Safety and Health
NK
Chemical Properties
Vapor Density:5.0
Evaporation Rate & Reference:.13
Solubility in Water:NEG.
Appearance and Odor:CLEAR AMBER LIQUID, HYDROCARBON ODOR
Percent Volatiles by Volume:52.2
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, AND BASES
Stability Condition to Avoid:WARM STORAGE, AND IGNITION SOURCES
Hazardous Decomposition Products:CO, CO2, SMOKE, TOXIC VAPORS, FUMES
Disposal
Waste Disposal Methods:DIPOSE IN ACCORDANCE WITH FEDERAL, STATE, AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.